淨化工程技術始於20世紀60年代。當時，潔淨室技術是為滿足軍工、精密儀器、航空儀器、電子等行業的產品質量要求，滿足這些行業加工和實驗研究的精細化、小型化、高純化、高質量、高可靠性而出現的一項新興技術。
Purification engineering began in the 1960s. At that time, clean room technology was an emerging technology to meet the quality requirements of military, precision instruments, aviation instruments, electronics and other industries, and to meet the
refinement, miniaturization, high purity, high quality and high reliability of processing and experimental research in these industries.
本公司從事空氣淨化工程設計、生產、安裝、調試及空調淨化設備產品，具有近十年的生產曆史。產品廣泛應用於生物製藥、醫療衛生、醫療儀器、電子儀器、航空航天、精密儀器、日用化工精細、食品飲料、汽車玻璃作業、空調淨化及安裝工程。下麵小編分享淨化工程的日常維護:
The company specializes in air purification engineering design, production, installation, commissioning and air conditioning purification equipment products, with nearly 10 years of production history. Products are widely used in biopharmaceuticals,
medical hygiene, medical instruments, electronic instruments, aerospace, precision instruments, daily chemical fine, food and beverage, automobiles glass operation, air conditioning purification and installation engineering. The following chapters
share the daily maintenance of the purification project:
1. 無塵淨化工程需要定期對電路進行維護。
1. Dust-free purification project needs regular maintenance of the circuit.
2. 在無塵淨化工程中更換高效過濾器後，需確認機架內無泄漏，並使用粉塵計數器進行檢測。隻有達到技術指標後才能進行正常工作。
2. After replacing the high efficiency filter in the dust-free purification project, it is necessary to confirm that there is no leakage in the rack and use the dust counter to detect it. Only after reaching the technical target can normal work be carried
out.
3,當發現風速變化應該首先檢查是否主要空氣過濾器的表麵是黑色的,如果黑色顯示預濾器灰塵能力更重要的是,阻力增加,也就是說,應該去除粉塵淨化工程的主要空氣濾清器無紡布清潔或更換。
3. When it is found that the change of wind speed should first check whether the surface of the main air filter is black. If the black shows the dust capacity of the pre-filter, more importantly, the resistance increases, that is to say, the main air
filter in the dust purification project should be cleaned or replaced by non-woven fabric.
4、無塵淨化工程應根據工程的實際使用情況，定期清洗過濾材料，在無塵淨化工程中起主要作用的空氣過濾器。
4. The dust-free purification project should regularly clean the filter materials according to the actual use of the project and play a major role in the air filter in the dust-free purification project.
5. 在無塵淨化工程中更換高效空氣過濾器時，應拆除噴淋球板，取出高效空氣過濾器，並按原高效空氣過濾器的規格型號更換新的高效空氣過濾器。確保hepa上的箭頭標記指向氣流方向，密封良好，防止泄漏。
5. When replacing the high-efficiency air filter in the dust-free purification project, the spray ball plate should be removed, the high-efficiency air filter should be taken out, and the new high-efficiency air filter should be replaced according to
the specifications and models of the original high-efficiency air filter. Make sure that the arrow marks on the HEPA point in the direction of the airflow and are well sealed to prevent leakage.
昆山昌瑞空調淨化技術有限公司，專注從事
空氣過濾器係列產品（初/中/高效、化學過濾器等）、
潔淨室淨化設備（拋棄式/可更換式/自動卷繞式過濾器、高效送風口、FFU高效過濾器淨化機組）的研發、生產、銷售和售後。
Changrui Air Conditioning Purification Technology Co., Ltd. focuses on the R&D, production, sales and after-sales of air filter series products (primary/medium/high-efficiency, chemical filters, etc.) and clean room purification equipment (disposable/replaceable/automatic
winding filters, high-efficiency air supply outlets, FFU high-efficiency filter purification units).
昌瑞空調手機網