空氣淨化工程設計，不得忽視的細節！

1, air conditioning in the cleaning project selection is very important, because in the design and construction of air-conditioning energy consumption is the biggest, so we need to pay attention to energy saving measures. In the design, partition and system, the calculation of air volume, the temperature is relatively stable, and determine the number of clean grade for the wind, the wind pipe insulation, and the flange of the link is complete, AHU, chiller, fan and other equipment selection are associated with the consumption of information, these details are we then design and construction must be considered in detail.

2、在裝修隊進場時的件事就是對地麵的評估，如果地麵足夠平整的話，簡單弄一下就可以了。否則，就需要找平，這項費用完全不能省。不管地麵終是選用地毯還是木地板，平整的地麵都是絕對的前提。
2, in the decoration team approach the first thing is to assess the ground, and if the ground is smooth enough, then simply make it. Otherwise, leveling is required, and the cost can not be saved at all. No matter whether the ground chooses carpet or wood floor at last, flat ground is absolutely premise.
3、在淨化工程淨化空調係統中，風管的性能很重要，一定要嚴密性好、不發塵、不積塵、不汙染、耐潮、耐腐蝕。在運行中，一般風管的局部阻力高於風管的沿程阻力，這點需注意，遇到這種情況需要改善。
3, in the purification project, clean air conditioning system, the performance of the wind pipe is very important, must be tight, good, no dust, no dust, no pollution, moisture resistance, corrosion resistance. In operation, the local resistance of the general air duct is higher than the resistance of the duct. This point needs to be noted that this situation needs to be improved.
4、現代對消防的要求有相關的規範，如果你要吊頂，室內所有的噴淋口一定要露出吊頂一定尺寸，而且要操持水平。
4, modern requirements for fire related specifications, if you want to ceiling, indoor all spray mouth must show a certain size ceiling, but also to manage level

昆山昌瑞空調淨化技術有限公司，專注從事空氣過濾器係列產品（初/中/高效、化學過濾器等）、潔淨室淨化設備（拋棄式/可更換式/自動卷繞式過濾器、高效送風口、FFU高效過濾器淨化機組）的研發、生產、銷售和售後。

Changrui Air Conditioning Purification Technology Co., Ltd. focuses on the R&D, production, sales and after-sales of air filter series products (primary/medium/high-efficiency, chemical filters, etc.) and clean room purification equipment (disposable/replaceable/automatic winding filters, high-efficiency air supply outlets, FFU high-efficiency filter purification units).